MPETE

iTrader: (1)

looks good. what size tires are those?

KKR5

2014 4x4

OilFieldCash

What are the specs on your lift and wheels/tires? Looks awesome!

Horrible picture. Looks nose high, but it's on an incline. 325/65r18 Terra Grapplers, too wide for the stock wheels and offset honestly. Putting a different set of wheels and tires on today. 2.5" AutoSpring upfront.

KKR5

6" Fabtech Suspension Lift - 35 x 12.50 Pro Comp Xtreme AT - 20X9 Fuel Hostage with a +14mm offset

Still looks good. What wheel and tire combo are you going with?

zbayer

First post! Here is my new FX2 I treated myself to for Christmas.

J.C. Deputy 160

MPETE....I'm not sure if your asking mine or not but mine are 275/70R18

OilFieldCash

I'm leaning towards pro comps but I have a set of 35x12.5 Mickeys barely used from my old Z71. I have two BMF Stealth Novakanes 20x9 0 Offset. Other two are still on back order..... :/ if I get the wheels soon I may just wear the mickeys out first. Coil overs are a must and bigger block for the back. That's probably as much lift as I'll go after unless I get bored haha. Traded black truck for white huh?

MPETE

iTrader: (1)

yes, I was. I thought I quoted your post but apparently I didnt. that's the size I want to go with too. I love the simplistic look of your truck I guess I'm just an old school guy who doesnt need all the bells and to appreciate a truck

KKR5

Yea I'd wear the Mickeys out first before I bought a new set. Pro Comp makes good tires though. I loved the black truck but it was way too hard to keep clean lol. White is so much easier as I'm sure you know.

OilFieldCash

I had a black '03 gmc ext can short bed.... I had to constantly wax it! Honestly... My OCD leads me to believe white is just as bad haha. I wanted silver or grey. I spent like 12 hours with clay bar and Collinite 845 in November... Yesterday I decided I need to pull my grey pinstripes off, so now I have to clay bar and wax it again. Mine had tons of rail dust. Where Texas are you at?