I know there are rims told threads on rims and tires.... My question is specific, that I can't find the answer to.

I just installed a 2.5"/3" Auto spring level and ordered 35/12.5r18 Toyos. My original plan was to run the stock wheels however the guy talked me int new wheels. The wheels are Fast Reactor wheels. They are 18"x9" with a 6" back space and +25mm off set. I have concerns now that they may not fit. Has anyone run wheels this size or close to it?

Thanks

 

u should have just enough clearance with possible minor triming front or rear of front tires. but with 25+ offset u should be able to clear. i had 265-75-18 kellys on 18x9 monsters w/18+ offset and tons on room since the wheel pushed the tires out farther. i bet others will chime in with info/photos to show this.

 

I run 35s on a +25 offset. I do have a 4" lift but I dont think that would be the difference maker. I have plenty of clearance where it matters. So u should too. You may have to trim a tiny bit of the front valance piece but nothing noticable.

 

Thanks for the info..... I'll find our Monday for sure.... I'll try to post a pic once there installed