Reverse sensor trouble
#1
Reverse sensor trouble
My reverse senors stopped working. I found the fuse box on the passenger side and pulled the fuse it was ok. I also put the truck in reverse and used a stethoscope to listen for buzzing that I have read about here there was nothing. What is the next step?
#2
Senior Member
Check the connectors for those wires near the spare tire in back. If all of them go out at once, fuse or where the wires are all together seems the most likely culprit.
#3
Senior Member
You need something to read the Parking Aid Monitor module. It will tell what sensor(s) have failed, ie left outer. (Assuming 2011+)
I used an Ancel 700FD on mine and found three parking aid sensors were bad.
2011 XLT 4x4 3.5l 3.55LS
I used an Ancel 700FD on mine and found three parking aid sensors were bad.
2011 XLT 4x4 3.5l 3.55LS
#4
Senior Member
wimmer ...
If you're not going to provide vehicle in your post(s), consider putting your complete vehicle information (year, model, cab, trim, engine, wheelbase, _x4 drive, mileage, maintenance, modifications, etc., etc.) in your signature to have it automagically included when you post. *Eliminates playing 20 questions when/if a post is made pertaining to your vehicle.
» Edit Signature ««« -click-
*Don't forget to [ save ] it.
.
The following users liked this post:
MSStateDawg (07-08-2022)