2013 f150, So, I popped a check engine light around a week ago, took her to AutoZone got a p0030 code which is bank 1 sensor 1 I replaced drove for a day check engine came back, same code P0030 and also P219A, so I unplugged sensor plugged it back in tapped it a couple times to make sure it was fully seated. today check engine popped again took to autozone now no p0030 code just the p219a code, finally had enough i bought a scanner and Heres the Data, from what i see it looks like a bad cat on the bank 1 but any input would be amazing to narrow this down. first 2 photos are at idle and the other 2 are the truck at 30mph with cruise control on EDIT: i did not replace bank2 sensor 1 could that be the issue ive seen some people have this issue until they replace the other side aswell :Another Update replaced bank 2 seosor 1 and now i have a bank1 and bank2 air fuel ratio code im stumped at this point maybe my truck does not like duralast o2 sensors

 

Are we supposed to just guess as to what you're working on?

 

apoligies first time 2013 ford f150