Question on Rear Springs (dumping the blocks)
Ok so here it is,
I just picked up a very nice 2014 F150 FX4. It came with a Zone's 4" lift (done by a local off road shop). I bought the truck as it had all the options I wanted.
Ok so I am not a fan of blocks or spacers. They have their points, but I will be offroading, camping, overlanding etc with this truck not just street driving.
Front is easy, I will be getting Fox (or similar) coil overs and ditching the spacers and the stock coil overs.
Rear is more difficult. I cannot find a spring that will lift 4" in the back (i will assume axle wrap may be an issue).
I was looking at Deaver Springs maybe with a 2" block, more like factory.
Any suggestions would be super helpful.
Thanks
I just picked up a very nice 2014 F150 FX4. It came with a Zone's 4" lift (done by a local off road shop). I bought the truck as it had all the options I wanted.
Ok so I am not a fan of blocks or spacers. They have their points, but I will be offroading, camping, overlanding etc with this truck not just street driving.
Front is easy, I will be getting Fox (or similar) coil overs and ditching the spacers and the stock coil overs.
Rear is more difficult. I cannot find a spring that will lift 4" in the back (i will assume axle wrap may be an issue).
I was looking at Deaver Springs maybe with a 2" block, more like factory.
Any suggestions would be super helpful.
Thanks
There's nothing wrong with a lift block an
s long as its kept on the small size. Combine a 2" block and some lift shackles to get the look you're after. Maybe toss an add-a-leaf into your stock leaf pack. Or have some custom spring made for your truck.
s long as its kept on the small size. Combine a 2" block and some lift shackles to get the look you're after. Maybe toss an add-a-leaf into your stock leaf pack. Or have some custom spring made for your truck.





