I got a pair power running boards, module and plugs I used FORScan and enabled power Running Boards which now shows under settings, building the wiring harness one of the steps says to connect to can low speed and high speed, my question is it says on instructions violet and orange wire as well as grey and orange wire, I am not finding grey and orange wire


is the 2013 can wires different

second photo is of my wiring

 

okay got wire harnesses soldered instead of quick connects, I did find the violet and orange and gray and orange on drivers side wiring, turned on boards went up and down couple times when opening and closing doors, now I see they are in down position and on dash when I set to auto the it goes to off, but boards stay deployed. Any suggestions?