Post Your 2WD Leveled Trucks
#102
LSWHO?
i have a 09 STX that i want to level and run 295/55R20 or a 305/55R20 on BMF Novakanes or XD Misfits. I think that the 3 in would give the most room and i will also use an AAL since i tow a 6x8 trailer with about 2200 lbs of lawn care equipment. i also dont have an issue trimming a little here and there if needed.
man i cant wait to get home and get this done. been too long since i drove my truck.
Last edited by Rob9550; 03-08-2012 at 11:19 PM.
#103
Senior Member
Originally Posted by Rob9550
do you have any issues with the 3in spacer? i have heard that the angles are not good on the upper control arms. with that being said, maybe the issue is on the 4wd models using a 3 in spacer. not sure thats why i am asking.
i have a 09 STX that i want to level and run 295/55R20 or a 305/55R20 on BMF Novakanes or XD Misfits. I think that the 3 in would give the most room and i will also use an AAL since i tow a 6x8 trailer with about 2200 lbs of lawn care equipment. i also dont have an issue trimming a little here and there if needed.
man i cant wait to get home and get this done. been too long since i drove my truck.
#104
LSWHO?
[QUOTE=SuperDave79;1514267]It's been on for almost two years and not causing any issues... Yet. My only complaint is the loss of shock travel. It can get rough off road or going over bumps fast. Even the dealer says everything looks fine...[/QUOTE
is it the rear shocks that you are having less travel with due to the spacer? i didnt think that the front would change due to the fact the shock is only located lower with the spacer.
is it the rear shocks that you are having less travel with due to the spacer? i didnt think that the front would change due to the fact the shock is only located lower with the spacer.
The following 2 users liked this post by CuJo:
Five_Point_ Slow (06-08-2014),
rastarush (05-30-2017)
#107