Shotokan1509

Did you ever do this?

bman2440

I know you said the vents are from Stiker, but what website did you get them from?

Thanks.

Marshbuster

What Bar is this? Where did you get it?

donello

Looked all around for a plate to utilize the interior dimmer, could not find one. so I designed and 3D printed very easy to access and quick swap if I ever need to go back to stock.

donello

3D printed mounting plate

[F2C]MaDMaXX

Need to keep looking for a potential place in mine, it's not like the older stuff that used to have switch blanking plates from the factory.

Marshbuster

I put Flush Mount switches on each side of my interior light and bed light switch.

Paul Day

i custom fitted my bar inside the grille, ppl dont see it unless theyre looking for it. works great for me and as far as the switches go mine are just like the other fellers lft of the wheel down low right of the light dimmer switch left of the steering wheel. i did have the big rockers like they have pictured here with the big red indicator lights on the switches, but i had to cycle them out, way too bright in the cab. I went to the rockers with allot smaller indicator lights on the switches themselves. Also i failed to get a pic of my power center under the hood. Its definetely the way to go now and it keeps you from wiring all the relays to your fendwells. etc. its a power center with a main power kill switch and it contains like10 stations with a relay pre- installed on the power station itself. You literally wire to the station and then wire to where you want the switch to go, and you are done. keeps everything tidy and neatn little nit of wire loom and it looks professionally done. Ill have to snap a pic of that power station and add it to this.

custom lightbar install. homemade brackets. you dont know its there unless youre looking for it. you see it doesnt stick out past the front of the grille, it comes out the same distance as the grille pieces do.

Paul Day

check out all this thread i added mine to this thread.

KustomFX

iTrader: (3)

Here are a couple of the latest switch panels that KustomFX, LLC. has done.
for the 2009-2014 F150’s we have switch panels for the popular “Headliner mount” switch panels, the “cubby hole” switch panels and if you have the flow through style console (with shifter on the floor), the Front pocket switch panel there too.
here’s some pics:













Please keep in mind that ANY laser etched logos are FREE, a Free service, and a gift. There is NO charge for any laser etched logo that you choose.

Any questions, feel free to ask on here or simply email me directly at:
lethalweapon09@yahoo.com

Thanks,
Brett