OEM Ford Rear Inner Fender Liners Installed
#1
Member
Thread Starter
OEM Ford Rear Inner Fender Liners Installed
Hey guys, just installed these yesterday, didn't have to take the wheels off, install time was about 10 minutes per side, uses all factory holes and brackets for install. I didn't like the fact that the Rugged Liners uses self tapping screws to hold theirs in place so I went with the Factory Ford Liners. Price was $125.
The following users liked this post:
walc (01-30-2013)
The following users liked this post:
Wanted33 (01-31-2013)
#4
Member
Thread Starter
Funny, we installed 4 sets of Rugged Liners on F150's and they all came with self tapping screws in the instructions to install the inside of the liners to the bed, maybe we got old stock or something. The OEM Ford Liners are an exact mold of the inside, they install using all the factory bracket holes, and all the holes line right up, no pushing or pulling to try and line up stuff like on the Rugged Liners. Having installed both, the OEM Liners are far superior in quality to the Rugged Liners IMO...
The following users liked this post:
RickyBobby (01-29-2013)
#5
I installed the rugged liners two weeks ago. Didn't use the push pins, just put the screws I removed back in place thru the liners. They fit perfectly and I didn't need a single push pin. $85 delivered. I'm just say'n...
#6
0100100001101001