Topic Sponsor
2009 - 2014 Ford F150 General discussion on 2009 - 2014 Ford F150 truck.
Sponsored by:
Sponsored by:

no reverse lights or rearview camera

Thread Tools
 
Search this Thread
 
Old Feb 16, 2021 | 01:53 PM
  #1  
steve392's Avatar
Thread Starter
5 Year Member
10 Year Member
Photogenic
Liked
Loved
 
Joined: Oct 2011
Posts: 954
Likes: 71
From: Little Ferry, New Jersey
Default no reverse lights or rearview camera

Not sure if this is coincidence or separate issues. 2014 f150 just had it's reverse lights stop working. I've changed bulbs and it's not them. It appears there is no power to the reverse bulb sockets. Brake/turn/running lights all work fine. Rearview camera is just a blue screen on the mirror when put into reverse. I've checked all the fuses too and all are good. What other things can i check or look for before I give up and bring it to the dealer?
Reply
Old Feb 17, 2021 | 08:08 AM
  #2  
Jimboy's Avatar
5 Year Member
5 Year Member
Liked
Loved
Community Favorite
 
Joined: Dec 2018
Posts: 4,446
Likes: 1,195
From: Ocean Springs MS
Default

Check and clean the grounds. There is usually one associated with the rear lights located under the bed or attached to the bed, maybe others know the exact location and will chime in.
Reply
Old Feb 17, 2021 | 04:45 PM
  #3  
Barry_Vee's Avatar
Senior Member
15 Year Member
Photogenic
Photoriffic
Shutterbug
 
Joined: Jun 2011
Posts: 1,517
Likes: 565
From: Ca. central
Default

Originally Posted by Jimboy;[url=[url
tel:6851300]6851300]Check[/url] and clean the grounds. There is usually one associated with the rear lights located under the bed or attached to the bed, maybe others know the exact location and will chime in.
On my 2011 that ground is on the driver’s side frame a little behind the spare tire. Also there’s a wiring harness plug for the rear in the vicinity to plug/unplug to wipe clean contacts. Helps to drop the spare for access.
Reply
Old Feb 17, 2021 | 07:01 PM
  #4  
ProjectSHO89's Avatar
5 Year Member
Veteran: Army
5 Year Member
Photogenic
Photoriffic
 
Joined: May 2019
Posts: 3,751
Likes: 1,117
Default

Check fuse F41 in the BCM. If good, scan the BCM for fault codes and reset, it possible.

Reply
Old Feb 19, 2021 | 11:40 AM
  #5  
steve392's Avatar
Thread Starter
5 Year Member
10 Year Member
Photogenic
Liked
Loved
 
Joined: Oct 2011
Posts: 954
Likes: 71
From: Little Ferry, New Jersey
Default

Thanks. Will check that fuse position, don't think it was one that i had checked. Once the ground dries up this coming week i'll drop the spare tire and look at wiring and harness.
Reply




All times are GMT -4. The time now is 02:00 AM.