My ipad mini install in my 13 with myford
 

Well after searching for a 13-14 F150 MyFordTouch radio bezel for months I finally got one for a good deal to experiment with.


I picked this panel up on Ebay for $125 shipped, it came out of a 13 raptor.

Attachment 498176
Attachment 498177

The first thing I did was plug it in to see how the new button layout reacts.


I immediately noticed the AC readout at the top of the 4.2" screen showing fan speed, driver and passenger temp settings, and climate control status.





Now while the display shows driver and passanger temp readouts only the drivers side temp control adjusts both sides. On the f150 with dual zone A/C the HVAC case is split at the blend doors and there is a passanger temp blend actuator with a different hvac case harness. So as it sits I did not gain dual zone A/C.



On the upside I may have gained Automatic A/C! I need to mess with it some more to make sure.
Attachment 498178
Attachment 498179
Attachment 498180
Attachment 498181

all of the buttons on the new MFT controls operate as labeled except the "media" button (not a big deal as the steering wheel media button still functions).


Now I had to find a place to mount the 4.2" screen where it would be visible all the time. The cubby to the right of the steering wheel looks like the perfect spot.


So after dissecting the FDIM to try and make it smaller to fit behind the cubby hole I realized im gonna have a lot of cutting to do behind the dash. I don't wanna cut up the FDIM bezel just incase it needs to go back behind the ipad or return to stock. So my only other option is to cut the dash behind the panel.


Attachment 498182


Attachment 498183


Attachment 498184


Attachment 498185

Attachment 498174
Attachment 498175

Attachment 498167


Attachment 498168


Attachment 498169


http://i1329.photobucket.com/albums/...ps6285dd60.jpg


Attachment 498170


Attachment 498171


Attachment 498172


Attachment 498173


My plan is to cutout the opening of the radio bezel .5" taller so the whole ipad screen is visible. Once I see how it looks after cutting depending if I like the look or not I may do a float mount instead.

That's slick and exactly what I would like to do only using an Android tablet.

.

I thought about going with a different tablet that would fit behind the MFT bezel opening without modification. I just love my "I" devices too much to use an android/windows based tablet.




I will keep this thread up to date as I mod. So keep checking back for updates.


Suggestions are welcome. Im torn between a permanent mount(looks factory but covers home button and front camera) or float mount(removable and leaves camera and home button accessible)

Yeah I hear ya on the "I" thing, I gave them a shot but just not my cup of tea, I like to customize and I anything it's impossible, it either works their way or not at all. Windows based hardware isn't my thing either, the factory my touch as I recall is Windows ce.

With Android you can change everything to suit every individuals wants and needs.

I have put out a feeler for the bezel on the salvage/used parts network so hopefully something will pop up.

Thanks for taking the time to post up the info, I'm subd.

After hours of thinking, measuring, cutting and sanding, I think I have a winner! Its a permanent mount that leaves the home button and camera accessible.


Attachment 498165


Attachment 498166


No bondo or paint needed. I just need to sand down the inside frame a little more to smooth things out.

Whachoo gonna do with your original bezel?

.

Add a connector inline to the mft bezel with a second pigtail behind the glove box incase I need to set the eq, clock, etc

So how is everything going to interact with the stock system to facilitate things like AC temps and radio?