Low and Slow 5.0
#41
Senior Member
Thread Starter
So I am going start my own build thread but in the mean time I have an update on my FX2's stance. I lowered it with a Mcgaughys 2/4 as seen in the first post. I was happy but not satisfied. The front seemed to sit too high so I measured it and sure enough it was 1/4 inch (give or take) higher in the front. So I did what I wanted to do from the get go and which was to buy just the Belltech adj shocks for the front and then Mcgaughy 4 inch drop for rear only and do just do a 3/4 drop. So now I went ahead and got the Belltech adj shock and drop the front to 3 inches. I am so much happier now!!
Before with 2/4
After with 3/4.......sorry crappy cell picture, other pictures was with my nice camera as you can tell in picutre quality.
Before with 2/4
After with 3/4.......sorry crappy cell picture, other pictures was with my nice camera as you can tell in picutre quality.
Last edited by REDrum5.0; 03-31-2014 at 08:01 PM.
#42
Senior Member
It looks awesome! I also plan on lowering mine 2/4 using the Ground Force kit
The following users liked this post:
tuxedoblk_5.oh (11-04-2015)