Leveling kit question
01-31-2017, 10:59 AM
#1
Junior Member
Thread Starter
Leveling kit question
Looking at getting a leveling kit put on my 2013 SCrew Lariat 4wd.(pretty new to me) The truck shop I am looking at says it usually does a 2.5 inch pro comp on this truck. My question is, when I measure center wheel well on the front and back of my truck, the front is exactly 2 inches lower. Should I get a 2 inch kit or will the 2.5 be fine and not noticeable? They can order anything.
Second, what leveling kit if different than the pro comp? Any preferences, one over another?
Thank you!
Second, what leveling kit if different than the pro comp? Any preferences, one over another?
Thank you!
Last edited by Harmon01; 01-31-2017 at 11:14 AM.
01-31-2017, 11:06 AM
#2
Senior Member
You'll notice if it sits taller in the front. Do you tow or haul ever? If so, go with the 1.5".
If you don't and you want it dead level, go with the 2".
No point in the 2.5" as it'll look like it's sagging and your suspension angles will be more severe.
If you don't and you want it dead level, go with the 2".
No point in the 2.5" as it'll look like it's sagging and your suspension angles will be more severe.
01-31-2017, 11:10 AM
#3
Junior Member
Thread Starter
Rarely tow and was looking for straight level. Thank you.