Stumpy

Ok so I've spent countless hours researching and reading and measuring and going crazy trying to find out what to do for my truck.

I have a 2010 XLT 4WD with stock 20" and I'm wanting to put some Cooper Discovery STT 35x12.5/20 without rubbing!

I'm planning on putting a 2.5" front and 1" rear leveling kit on. Has anyone had experience with this combination of tire brand, size and leveling kit together? I know plenty of you have done 2" kits with 295/60R20 Trail Grapplers but I'm really wanting the STT instead.

Any advice here will help and pics would be even better!!! Thanks in advance!

Stumpy

Anybody?

2010FX4F150GILROY

They will rub

swazispencer

Too wide. You need a tire about 11.5" wide.

Stumpy

Like minor rubbing when in full lock or more serious rubbing? I could go with a Nitto Trail Grappler at 295/60R20 which is only 12.13 wide.

BobLobLaw

The 295's should work. I know there's a lot of people running 305 with minor rubbing

Stumpy

I think I'll just go with the Nittos then. Too bad shipping to Alaska is over $1,000!!!!...I can work around that though lol

BobLobLaw

mother of god that's expensive! And I thought shipping to BC was too much.

swazispencer

I had 295/65/20 nitto trail grapplers which were about 11.5" wide and they were very close to touching my spindles. And at full lock, they rubbed like crazy!!! Stock 20"s BTW.

Stumpy

With what size leveling?