Josh at tasca - need pricing on some raptor parts
#11
I have looked at the wiring diagram and the setup to add the functionality that the off road sswitch will provide is easy. There is a pinout from the TCCM that will be swapped out to the raptor module and from there you simply need a momentary SPST (single pole single throw) button. This should allow you to ground out that pin which will tell the module to go into off road mode. Something should display on the in dash LCD (hopefully it does) as this is what the raptor does.
I would agree with DLH that hill descent control is above and beyond what most people are goign to want to get in to. Therefore it might be nice to just order the off road switch and make a custom location for it. there will only be two wires running from the TCCM tot he button in this configuration, one for the led and one for the actual switch.
I am currently modeling a custom carbon fiber housing for this switch and trying to find a good location for it. Once i get a location and design I will make a wax mold and layup my carbon housing.
I would agree with DLH that hill descent control is above and beyond what most people are goign to want to get in to. Therefore it might be nice to just order the off road switch and make a custom location for it. there will only be two wires running from the TCCM tot he button in this configuration, one for the led and one for the actual switch.
I am currently modeling a custom carbon fiber housing for this switch and trying to find a good location for it. Once i get a location and design I will make a wax mold and layup my carbon housing.
#13
I already looked into the aux switches. The switch panel comes complete with the panel, off-rad switch and hill decent switch all assembled. It is on back-order, mine should ship out to me on Monday. I also ordered the harness for the switch panel, but the rest of the wiring will be all custom and up to you, the rest of your truck is not wired for it. I don't have the part numbers here but they were really pretty cheap, Switches about $140-160 and the harness was $35. I'll post what I find when my parts show up. Good luck but this, the Raptor 4x4 switch and TCCM is plug and play. The Aux switches, off-road and hiil decent will all be custom. I wouldn't bother with the hill decent it goes to the pcm and with out a custom tune I don't think it will do anything.
Where are you planning on mounting it? I've been trying to figure out switch locations myself...
R
#15
Senior Member
Thread Starter
Me too, I also ordered the OEM offroad switch and the hill decent as they were not that much. Decided to change the orange reflectors in the mirrors to black too while I was at it.
#17
Senior Member
Thread Starter
Off road switch is AL3Z-14B166-AB
Hill Descent button is AL3Z-14B596-AA
Switch panel (Holds off road mode, hill descent buttons and Aux switches is AL3Z-13K724-AB (Aux switches included)
Part numbers were from a raptor forum link I came across.
http://www.fordraptorforum.com/f5/20...arts-list-428/
#18
Senior Member
Join Date: Dec 2010
Location: Salisbury,MD
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
Whats the part number for that? Does that work with the turn signals or just black it out?
#19
Member
I ordered all of the parts from Tasca.
Off road switch is AL3Z-14B166-AB
Hill Descent button is AL3Z-14B596-AA
Switch panel (Holds off road mode, hill descent buttons and Aux switches is AL3Z-13K724-AB (Aux switches included)
Part numbers were from a raptor forum link I came across.
http://www.fordraptorforum.com/f5/20...arts-list-428/
Off road switch is AL3Z-14B166-AB
Hill Descent button is AL3Z-14B596-AA
Switch panel (Holds off road mode, hill descent buttons and Aux switches is AL3Z-13K724-AB (Aux switches included)
Part numbers were from a raptor forum link I came across.
http://www.fordraptorforum.com/f5/20...arts-list-428/
AL3Z-13K724-AB Comes compete with Aux switches, Off-road switch, Hill decent switch and trim panel. Mine just arrived. I also got the wire harness AL3Z-14A318-SA, about $35. It has the connectors to plug into the switches, the rest of the wiring will have to be custom, as our trucks are not prewired.
Dennis
#20
Senior Member
Thread Starter