click my sig for some ideas

 

Do you know how to do the iPod touch mod? I can't seem to remove the paneling. And no one else is offering any help...I went on the iPod mod location thread, but no one is active on there anymore...anyways, I want to do it in the passenger side junk cubby. Not the driver side one, as I think it might be a bit distracting...anyone that knows how to remove that paneling so i can put the ipod touch in place of the cubby...Help would be appreciated. Thanks...

 

The passenger side panel has a bolt holding it in place under the air bag. Open your glove box. The glovebox itself has a large plastic tab on each side u can push inwards to that the glovebox will unhinge all the way to the floor mats. If u look up into your dash through the glovebox opening, u see the three bolts that hold the glovebox in place, 10 mm i believe. Undo the three bolts, and push the airbag out from the inside while prying from the outside..once its out far enough, u can access the 6 mm copper screw holding the panel in place, then just pry the panel off from the dash, from the bottom up is easiest

 

Oooh i almost forgot. The radio bezel also holds the panel down. U will have to remove the rubber mat on top of the radio bezel and undo the two bolts there, then using a small screw driver pry off the lil synv/aux panel at the bottom of the radio bezel to expose one more screw.. after that, u should be able to just pry off the passenger side of the radio piece to have enough clearance to remove your panel!

 

Alright. Thank you. I will give it a try. If I have any questions I will ask you. Thanks