HVAC Issues
Thread Starter
Junior Member
Joined: Sep 2020
Posts: 8
Likes: 2
From: Tennessee
HVAC Issues
My problem is that my AC compressor will no longer kick on/engage the clutch. It is a 2010 Platinum with dual automatic climate control.
Ok, now here's the scenario: I just replaced the blower as well as the control module/resistor (They're both compatible replacement parts for the truck). Just prior to replacing the two parts my compressor would kick on and off, but I had no blower at any speed. Now I have a working blower, but no AC clutch engagement, thus, cold air. I've gone through all of the associated fuses and relay, and all check out perfectly. All that I can think is that I got a bad module, but if anybody on here can point me a better direction I'd appreciate it.
Ok, now here's the scenario: I just replaced the blower as well as the control module/resistor (They're both compatible replacement parts for the truck). Just prior to replacing the two parts my compressor would kick on and off, but I had no blower at any speed. Now I have a working blower, but no AC clutch engagement, thus, cold air. I've gone through all of the associated fuses and relay, and all check out perfectly. All that I can think is that I got a bad module, but if anybody on here can point me a better direction I'd appreciate it.
Last edited by Baxter83; Sep 28, 2022 at 12:05 PM.
