Farmboy2012

What about something like these?

http://www.protuninglab.com/20fof1du...tm_content=pla

b316

just don't be a tool and install the 6000K plus bulbs, cause they will be 'brighter' Day light bulbs blind people, even the slight hint of blue/white.

Pure white is not meant for car driving, but they sell it cause 'Merica bigger numbers means better.

Toddman38

iTrader: (5)

They'll look cooler than stock housing's(Appearence Wise) but no better light output(Performance Wise)! And dont try to put HID's in those, they're not made for them!!!

Farmboy2012

What about a 4300K bulb.... I've never done it to cars and trucks, but I have put HID's bulbs in tractors.

BarryT82

iTrader: (1)

You can get them for less than $950 and you can build your own harness for $85
Here:
http://www.ebay.com/itm/2013-Ford-F-...vxp=mtr&_uhb=1
http://www.ebay.com/itm/2013-Ford-F-...vxp=mtr&_uhb=1

If you was something unique you can buy these. Scroll down:
https://www.facebook.com/pages/Plain...=photos_stream

HCFX2013

NO plug and play HID is acceptable in a factory halogen housing. They scatter, they glare, and look like absolute crap. But that's another subject. Just save up a fund and get some retrofits done, and get some brighter halogens for the time being.

You could also get some Rigid duals in place of your high-beams for about $270 or so. They offer tremendous light output!

Roughneck12

PIAA s are very good also. They have a distinct cut off like retros and will do till I get mine. A huge improvement on the bulbs that came in the truck.

Farmboy2012

Yea after a little reading, I think I'm going to look more into a PIAA Xtreme Bulbs... Just wish I could find some pictures or video of the differences from stock.

Old Smoky

I have a 2013, are the bulbs the same as the 2012's?

Looked up the PIAA Xtremes and came up with:
Bulb Size: H13
Replaces OEM bulb size: 9008

Is this right?

Schutz006

Yes. The H13 are on the 2012 also.