Got my Bravado's installed!!!
#1
Senior Member
Thread Starter
Got my Bravado's installed!!!
I took off early and got them installed lol. They are 22x9.5 +35 offset Axe wheels on 305/40r22 Nitto 420S's. Wheels are one-piece cast, machined face and lip with graphite inner spokes.
I'll take some nice pics once I clay and detail the truck this weekend. Until then these iPhone pics will have to do which unfortunately doesn't do these wheels any justice. These things are beautiful in person. Looks almost like the truck came with these from the factory or it was an option which is the look I wanted. What you guys think?
I'll take some nice pics once I clay and detail the truck this weekend. Until then these iPhone pics will have to do which unfortunately doesn't do these wheels any justice. These things are beautiful in person. Looks almost like the truck came with these from the factory or it was an option which is the look I wanted. What you guys think?
Last edited by HAK; 03-14-2013 at 04:46 PM.
#3
Senior Member
Thread Starter
Thanks. Yea I don't like wheels that everyone and their momma has. I love 'em and the Nittos ride better than my stock 18" Michelin's did.
Here's some better pics after giving the truck a much needed bath...
Here's some better pics after giving the truck a much needed bath...
#4
Senior Member
Looks good, now needs to lowered just a tad!
#5
One Clean Machine
iTrader: (5)
Wheels look good! Remind me a lot of the Harley wheels...
#7
Senior Member
Thread Starter
Thanks fellas!
I wanted something that was sort of OEM looking or look like a factory option but also different than what everyone has. Not too flashy and the graphite details of the wheels tie in the FX trim. I went with black splined lugs to bring a little of the truck paint onto the wheels. Gives a subtle nice detail IMO. I have to say the machining of these things are amazing and seeing them in person i was kind of blown away lol. The paint and overall quality of the wheel is top notch and i couldnt be happier with how they turned out.
I'm going to lower the rear to close in the gap and level out the truck.
I wanted something that was sort of OEM looking or look like a factory option but also different than what everyone has. Not too flashy and the graphite details of the wheels tie in the FX trim. I went with black splined lugs to bring a little of the truck paint onto the wheels. Gives a subtle nice detail IMO. I have to say the machining of these things are amazing and seeing them in person i was kind of blown away lol. The paint and overall quality of the wheel is top notch and i couldnt be happier with how they turned out.
I'm going to lower the rear to close in the gap and level out the truck.
Last edited by HAK; 03-16-2013 at 11:28 PM.
Trending Topics
#8
Senior Member
Thread Starter
BTW I went with the DE8T-1A180-AA TPMS sensors and did NOT have to do the re-learn thing with my truck nor had to buy the little learning remote. I had seen a post on some raptor-related forum of a member using the same sensors I did from the same ebay seller and he also didn't have to do any of the re-learn stuff. I've driven several hundred miles and a tank of fuel so I would of imagined it would of thrown the (!) light and TPS error on display by now. Maybe these are auto-learning or something. Don't care what they are as long as I don't have to deal with the warning lights lol.