redfred

I'm looking for some help on installing a GForce performance chip. The very scarce instructions says it plugs into the IAT/MAF sensor. I would appreciate any help with the install including pictures. I could work on cars 40 years ago but the new computer vehicles..........I'm lost . Thanks guys

hd2000

IMHO do yourself a favor and send it back, it will not do anything that is promised. Just from what I read on their site it looks like it will cause you more trouble than good.

kozal01

iTrader: (2)

This for sure ^^^ Send it back or throw it in the trash.

redfred

Well i was told they work. O well i tried. thanks

Brett Armstrong

I'm lousey with an ohm meter! Can anyone tell me what color the two wires that go to the mass air flow (maf) sensor in my 06 5.4 f150. There are 6 wires that go into the plug and apparently only 2 directly control the sensor. I want to install a gforce chip that claims to improve fuel mileage and you attach it to the two wires that control the maf sensor. Appreciate any help out there.

Cweaver016

Send it back garbage does absolutely nothing. I had one on my 11'. But if you want to see for yourself I believe the two wires were Brown and blue on my mai. I had my local tune shop tell me in the long run it will ruin your engine. It's practically telling itself there's more air coming in than there really is. Causing the engine to want to push harder but think about it there's no really anymore air so making your engine over work itself for no reason. I immediately took mine off. If you want to send it back don't install they won't take it then. Just my 2 cents tho. I'll send you a pic of the wires if you still want them.

my67falcon

FWIW: this is a year and a half old thread