Front Suspension Torque Specs
#1
Senior Member
Thread Starter
Front Suspension Torque Specs
Hey guys,
I'll be tackling the IWEs, hubs, etc soon due to the grinding. Looking ahead for reassembly, I'd like to see if any of you know the proper torque specs for the following parts on a 2014 4x4. I found some values but they are for the 04-08, not sure if they changed.
Tie rod end nut
Upper ball joint nut
Lower ball joint nut
Hub assembly bolts (4 total to the knuckle)
Axle/spindle nut
Thanks!
I'll be tackling the IWEs, hubs, etc soon due to the grinding. Looking ahead for reassembly, I'd like to see if any of you know the proper torque specs for the following parts on a 2014 4x4. I found some values but they are for the 04-08, not sure if they changed.
Tie rod end nut
Upper ball joint nut
Lower ball joint nut
Hub assembly bolts (4 total to the knuckle)
Axle/spindle nut
Thanks!
Last edited by 14STX5.0; 07-04-2018 at 10:39 AM.
#2
Member
These specs are for a 13 and should be all the same with exception to the lower front shock/strut mount as it is different on the 14. The 13 has one huge thru bolt, the 14 has a standard lower shock mount twin bolts. Don't have the spec on those so use your best judgement by remembering how tight they felt coming off.
.
.
Last edited by RLXXI; 07-04-2018 at 01:05 PM.
The following users liked this post:
14STX5.0 (07-05-2018)
#5
Member
#6
Member