Found remote start programming instructions
01-20-2014, 09:37 AM
#1
Underground Rock Hound
Thread Starter
Found remote start programming instructions
For those of you who have been looking for factory set programming instructions on the OEM remote start systems, I found tech instructions.
http://techservices.codesystems.com
you will need to make a login account. Once in, click on Ford, and use the drop down menu. Tech settings can be found under the programming tips and instructions.
Disclaimer.. If you are not 100% sure which system you have, don't mess with the factory settings..
It looks like this covers all OEM systems to 2013 Gen 2 with separate key fob.
http://techservices.codesystems.com
you will need to make a login account. Once in, click on Ford, and use the drop down menu. Tech settings can be found under the programming tips and instructions.
Disclaimer.. If you are not 100% sure which system you have, don't mess with the factory settings..
It looks like this covers all OEM systems to 2013 Gen 2 with separate key fob.
Last edited by Jjayf; 01-20-2014 at 09:47 AM.
01-20-2014, 10:59 AM
#2
Reprogrammed my 2010 a couple years ago to stay running 15 minutes instead of 10, and also changed the setting that would kill the engine when you open the door.
The directions took me a bit of time to figure out.
The directions took me a bit of time to figure out.