tland4

That's what I want to know

It could be that it's not updating when I save it, but I've enabled remote start and DRL's. I'd like to say I know what I'm doing; hard for me to think the mistake is on my end. But who knows. Still waiting for others to chime in

Chris6272

Anybody...?

digitaltrucker

You also have to install a new switch, if and when it can be programmed.

JAMADOR

Not sure on the pre-2015.
On my 2016, I was able to disable the door ajar chime when the truck is in park. Chime still sounds if the door is opened while in any other gear for the 'trans not in park' alert.
I have the electronic parking brake in my 2016, so I don't know if the p-brake alarm sounds on trucks with a manual p-brake.

stevieb_wv

Another thumbs up for Forscan fixing the hyperflash after switching to LEDs. Saved me a bunch of money on resistors. Tested before changes and after and can confirm that I did have hyperflash, then after making the change in Forscan it's back to normal.

ScubaKen

What year and model truck and could you tell a little about how you did it. Kinda step by step?? I'm going through the same issue with LED's. Changed all lights on exterior of my truck to LED's

ososlow

I posted it earlier in the thread somewhere, but It made no difference in my truck either. Over the same stretch of road with my needle right on 100 km/h, my gps read the same with stock tires setting as Raptor size.
It sort of felt like it shifted different. But I'm betting that was all in my head.

stevieb_wv

2013 F150 SCrew FX4 Connected to truck with Forscan. Went to BodyCM, and it was right there. There's options for front and rear both. It's pretty simple.

digitaltrucker

Any one make our mirrors auto fold open/close? like they did on 15's and up?

Spiky

Is this a feature beyond the standard power fold you are talking about?