Fog light halos
Has anyone done this yet and was this how you did them? I'm looking at the Oracle plasma ones.
http://youtu.be/GIA_5_9WZNU
http://youtu.be/GIA_5_9WZNU
Much easier to buy the ones with the cheap halo and upgrade it to the plasma style. https://www.f150forum.com/f38/ebay-p...r-fogs-254433/
If I had to do it over, I would skip the HID upgrade to the fogs, the OEM HIDS overpower the 35w hid I installed and its very difficult to tell if the fogs are on. The Halo is wired into my turn signals and looks cool IMO.
If I had to do it over, I would skip the HID upgrade to the fogs, the OEM HIDS overpower the 35w hid I installed and its very difficult to tell if the fogs are on. The Halo is wired into my turn signals and looks cool IMO.
Last edited by lanceb1b; Aug 22, 2014 at 12:49 PM.
Thread Starter
Senior Member
iTrader: (1)
Joined: Oct 2011
Posts: 1,356
Likes: 63
From: Langhorne, PA
Much easier to buy the ones with the cheap halo and upgrade it to the plasma style. https://www.f150forum.com/f38/ebay-p...r-fogs-254433/
If I had to do it over, I would skip the HID upgrade to the fogs, the OEM HIDS overpower the 35w hid I installed and its very difficult to tell if the fogs are on. The Halo is wired into my turn signals and looks cool IMO.
If I had to do it over, I would skip the HID upgrade to the fogs, the OEM HIDS overpower the 35w hid I installed and its very difficult to tell if the fogs are on. The Halo is wired into my turn signals and looks cool IMO.
I did the ones in my 13 Limited, used the adjusting hardware for the original lights, fit fine.
Thread Starter
Senior Member
iTrader: (1)
Joined: Oct 2011
Posts: 1,356
Likes: 63
From: Langhorne, PA

