so i tried to find something with the search bar but couldn't, just wanna know the best way to cleanly get that logo off the tailgate.. thanks

 

Piano/guitar wire or heavy weight fishing line. I peeled it off slowly by hand and my fingers ached for 2 days. The adhesive used is atomic so you will want some 3M adhesive remover to get the remnants off.

.

 

Just removed mine this evening. Used a double loop of dental floss to get behind the emblem about half way, then just pulled it off the rest of the way. The adhesive left behind is crazy sticky, about 1/8" thick. I used a thin spatula (wife was thrilled) wrapped with a thin cloth to remove the bulk without touching the paint, then used a piece of bath towel soaked in Goo Gone to rub off the rest. It takes time. Don't get in a hurry.

 

its expensive, but buy the 3m adhesive remover. I think its $10 for the small can. Alot less work than using goo gone.

 

Awesome I'm gonna give this a try tomorrow with some fishing line thanks guys

 

Got it done today, took about 15 minutes total.. used some fishing line and 3m remover. sprayed the remover right on the logo put the fishing line behind it and just worked my way across. after used a rubber spatula to get the rest of and then wiped clean with paper towels..


end result

 

I rolled the left over sticky crap off my hand and got any residue with too gone easy as cake... An used fishing line to cut the glue behind the emblem