13' 3.5 ecoboost. Roughly 130,000

I currently have misfires on bank 2 cylinders 4 5 and 6 as well as camshaft bank 2 sensor 2 failure these are the codes that were found when taken for diagnose found cylinders four five and six are misfiring but camshaft position sensor is working has anybody seen anything like this? Timing chain was replaced roughly a year and a half ago new coils were put on four five and six two test for problem.

 

I would look at the variable cam timing on bank 2, could be a bad VCT solenoid.

 

What are the actual codes? The PCM can throw a variety of codes relating to the camshaft position sensors so knowing which code you have is important. How have you verified that the camshaft position sensor is working?

 

P0304 Misfire in cylinder 4
P0305 Misfire in cylinde 5
P0306 Misfire in cylinde 6
P0300 Random Misfire
P0390 camshaft position sensor b Circuit 2 (Bank 2)
P0394 camshaft position sensor b intermittent (Bank 2)
P0299 Turbo under boost

 

How did you fix this? I'm having the exact same issues.

 

Also having this same issue did you figure it out?

 

OP hasnt been logged in like 3 years.

Your best bet would be to start a new thread but the sensor intermittent along with all 3 cylinders misfiring my first thought is a harness issue