Camera is unavailable????
Camera is unavailable please contact your dealership anyone had this issue I am out of warrantee need help getting it fixed
|
Most of the time it's the camera but you can not rule out wiring or the sync shout 9 times out of 10 it's the camera
|
Mine did that a while ago when ford replaced my tailgate camera. I think mine was a software issue.
|
Maybe a master reset will work I hate My touch Sync
|
Since your are out of warranty, you might want to check a couple of things before ordering a new camera.
#1, Check the camera quick disconnect at the tailgate, clean it with contact cleaner if needed. Remember to add dielectric grease if you do clean it. #2, crawl under the truck at check the wiring harness, make sure it is not damaged #3, Pull the SYNC fuse (I think it's #20, check your manual for the right one) #4, try a full power cycle. Disconnect the negative terminal at the battery for a minimum of 15 minutes. If you do need to replace the camera, it's Part# BL3Z-19G490-B |
Originally Posted by soaringfalcon
(Post 4355900)
Since your are out of warranty, you might want to check a couple of things before ordering a new camera.
#1, Check the camera quick disconnect at the tailgate, clean it with contact cleaner if needed. Remember to add dielectric grease if you do clean it. #2, crawl under the truck at check the wiring harness, make sure it is not damaged #3, Pull the SYNC fuse (I think it's #20, check your manual for the right one) #4, try a full power cycle. Disconnect the negative terminal at the battery for a minimum of 15 minutes. If you do need to replace the camera, it's Part# BL3Z-19G490-B |
Originally Posted by Spazmonkey05
(Post 4356338)
And if you do replace the camera you also need the Ford emblem that sits over the camera. I have not been able to remove one with out damaging it yet. It has clips that break and tape that sticks it to the truck.
Thanks for all the help |
Originally Posted by Spazmonkey05
(Post 4356338)
And if you do replace the camera you also need the Ford emblem that sits over the camera. I have not been able to remove one with out damaging it yet. It has clips that break and tape that sticks it to the truck.
|
Originally Posted by BigEvil2005
(Post 4356430)
I hit the emblem a coulpe times and it started working ao there must be a loose connection in there
Thanks for all the help |
Originally Posted by BigEvil2005
(Post 4356430)
I hit the emblem a coulpe times and it started working ao there must be a loose connection in there
Thanks for all the help |
All times are GMT -4. The time now is 06:08 PM. |
© 2024 MH Sub I, LLC dba Internet Brands