Blend door
09-06-2015, 10:39 AM
#1
Junior Member
Thread Starter
Join Date: Dec 2011
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Blend door
I have a 2009 STX with single temperature control which a few weeks got "stuck" on the coldest setting. I'm assuming it's the blend door but I'm confused because I don't hear any popping noises or such like I have had with other vehicles. Anyone else dealt with this?
02-07-2019, 09:48 AM
#3
Junior Member
Join Date: May 2018
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
I have a 2010 FX 4 and just recently I could not switch the vents from panel to defrost + floor or just floor.
All my temperature controls function fine. What I was able to find is the there is a actuator that works the defrost + floor or just floor.
This actuator is located just to the upper right side of the gas pedal and relatively easy to access. I bought the part for $32 and will try it as soon as it arrives. The part number is YH-1881 and this was confirmed by the dealer I bought the truck from.
I will reply and let everyone know if this solved the problem.
All my temperature controls function fine. What I was able to find is the there is a actuator that works the defrost + floor or just floor.
This actuator is located just to the upper right side of the gas pedal and relatively easy to access. I bought the part for $32 and will try it as soon as it arrives. The part number is YH-1881 and this was confirmed by the dealer I bought the truck from.
I will reply and let everyone know if this solved the problem.
