I'm considering swapping my factory head lights for a set of Anzo black projector halos. I want to put HID lights in them 6-8000K. I want to keep the factory fogs with a set of silverstars or put some Hella Optilux 2500's in there (I like the look of them, still have to check if they'll fit or not).
Anyways, I've read certain things about using HID's with Anzo's, and want to know some of your opinions on it. And if there are any kits that are recommended.

Thanks guys!

 

You will have to pull the projectors out of the ANZO lamps and clearance the projector for the ground wire on the HID bulb. I used a dremel to get it right on the ones I did for a friend.

 

Thanks for the reply! So I don't need any special kit?
I want to throw some 10,000K 55watt bulbs in there. It's going to be my first official mod.

 

If your going to he extent of swapping to a set of Anzo's projector headlights.
take the projector out.
do a retro of a FX-R projector or whatever best fits in the anzo projector hole and the corresponding hid kit (factory)

personally I would stay away from a 10,000k hid kit.

check out http://www.hidplanet.com and read up in the HIDPlanet University