Hey guys, I am ordering rancho's quick lift struts/coils for the front along with all new front end parts....

I will be wanting to keep the factory rake so I plan to use 3" tapered blocks which will add 1.5" of lift in the rear...

I would like to stick with Rancho 9000 shocks in the rear, however, my only option is stock or 2.5" of lift with their shock lengths.

What have y'all done?

Thanks!

 

I am running a 3" rear block (and a 1.5" AAL) with rear raptor 3.0" takeoffs though. If the shock is around 28-31" extended length you should be fine.

I had a 2" block and 1.5" AAL before the 3" and was right at 25.5" extended length on my rear shocks. Now with the 3" and AAL I am right at 26.25".

 

Gotcha,

The stock height for my application from rancho website: (Compressed to extended lengths) 17.6" to 28.5"
The 2.5" lift shock is 18.6" to 30.5"

So if I wanna be in a shock 28-31, either would be ok...

Thanks!!

 

 

Perfect, Rancho suggested the shock for 2.5" of lift as well...

Thanks!

 

Not exactly the setup you're looking to run, but I am running 3" blocks on the rear axle.

3" front and back...

 

Are you running stock height shocks or longer shocks?

Looks good!

 

Thanks
Stock shocks for now. Done a lot of work and traveled many miles with this setup, doin well so far...