When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I just bought this truck and it doesn’t run do any of y’all have fb messenger or snap chat and would mind just listening to my truck and watch what it does to maybe give me an idea on what to check.
it starts first crank. When I go it goes but it’s delayed and it’ll randomly almost die and start speeding up. I changed all the spark plugs, put a k&n air filter.
the engine reader at autozone didn’t exactly tell me anything that would direct me to the right thing Imo.
If you're not going to provide vehicle information in your post(s), consider putting your complete vehicle information (year, model, cab, trim, engine, wheelbase, _x4 drive, mileage, maintenance, modifications, etc., etc.) in your signature to have it automagically included when you post. *Eliminates playing 20 questions when/if a post is made pertaining to your vehicle. »Edit Signature« *Don't forget to [ save ] it.
.
That's a lot of codes, all in the same general area. I wonder if you have a damaged connector on the PCM, or just the PCM itself is a problem. Not sure of the pinout for your truck, but those might all be in the same connector.
So, it's 2 connectors. I think you should start there at the PCM. Look and see if there is any damage to the wires or the metal in the connector. Maybe spray them with contact cleaner. Plug/unplug several times so the metal can get a little scraped up if it is dirty after more than a decade.
I almost bought an explorer on the internet with those codes. It all leads to one fuse. Or the PCM bad, or messed wiring. Since there was emissions here, I passed. Could have been a mouse honeymoon motel.