Air bags and a 5th wheel Hitch... will it work
#1
Air bags and a 5th wheel Hitch... will it work
After looking at putting air bags in my truck and then ordering the brackets for my DSP 5th wheel rails I noticed that they are both NO DRILL installation. My assumption is that they will be using the same holes on the frame.
My question is can I do both??? Or will I need to do springs instead of the air bags?
Any help would be great
My question is can I do both??? Or will I need to do springs instead of the air bags?
Any help would be great
#2
My gooseneck didnt use any factory holes in the frame. it attached in away that just used Ubolts. works great. And I do not use air bags. I have a 2010 FX4 SCab with the max tow. it may be a little different since I can place stuff on my trailer where I want it, but my truck usually sits level. It may be a tad different if your using 5th wheel to tow a TT. But if it doesnt sit level you may want to check the scales to make sure you arent going over weight. There have been a couple threads on this subject. Do a search on gooseneck or 5th wheel towing.
Below is shown towing my trailer with a 1967 Power Wagon.
Below is shown towing my trailer with a 1967 Power Wagon.