I've read some similar threads but none that seem to pertain to the 2009+ trucks. So here's my situation: I have a 2010 XLT Supercrew and am in the process of swapping out the chrome front and rear bumpers for black. The front bumper I'm getting has holes for fogs, but right now my truck is not set up for them. I know I need a new headlight switch and I've located one of those, but I'm not sure if any of the wiring is already there for the actual light hookup at the bumper. Does anyone know? I guess I'd prefer to just go with OEM fogs if I can find them for a reasonable amount, unless there's a good aftermarket "drop in" solution. Any help would be appreciated.

Thanks !!

 

The wiring unfortunately is not there. I did this to my 2009 and can provide a parts list if you need. I can also provide the wiring setup and what you will need but I need to dig through my paperwork as it is all together from my BBB hearing.

 

That would be great if you could, I would really appreciate it. I can't believe it's not prewired for it. What a bummer.

 

Anyone got the diagram or no where to get harness and relay put my new bumper on but now need to wired them to my new switch can't seem to find harness or relay

 

First off the relay is already in the SJB on all trucks irregardless if the truck came with or without fog lights and same goes for the light switch wiring to the relay so nothing more needed there. Changing out the harness would entail quite a bit of work and is easier if you ran your own wires (12ga.) to the lights, battery and SJB.

I have to comb through my diagrams to get you what you need.....

 

Please do I couldn't find the relay or anything yesterday went through all the wires would like to hook them up thanks

 

Any update on this?

I have a friend with this exact question..