Adding inline fluid filters trans/ps
Thread Starter
Junior Member
Joined: Mar 2018
Posts: 2
Likes: 0
Adding inline fluid filters trans/ps
My 2010 XL did not come with the trans cooler and I have purchased the factory cooler and hoses necessary to retro fit them and will do the filter and fluid change at the same time. I am also want to add an aux inline filter (magnefine most like as I use them on my Honda AT and PS for the kid hauler) to the trans and ps lines. From the parts listing, the inlet hose is the upper driver side hose with the 90 degree bend in it,
2
Inlet hose. Inlet tube. Tube. . Upper
4.6 LITER, W/4 SPEED TRANS.
9L3Z7C410B
and the lower hose on the passenger side (or toward the passenger side) is the outlet. Need to know if this is correct for inline filter flow.
In the same manner, the parts listing shows the smaller diameter hose as the return hose
11
P/S RETURN HOSE. Reservoir hose. Return hose. Upr return hose.
2009-10, 4.6 LITER.
AL3Z3A713F
and the larger hose, the P/S suction line.
Can anyone verify the flow path for the trans and p/s fluid.
2
Inlet hose. Inlet tube. Tube. . Upper
4.6 LITER, W/4 SPEED TRANS.
9L3Z7C410B
and the lower hose on the passenger side (or toward the passenger side) is the outlet. Need to know if this is correct for inline filter flow.
In the same manner, the parts listing shows the smaller diameter hose as the return hose
11
P/S RETURN HOSE. Reservoir hose. Return hose. Upr return hose.
2009-10, 4.6 LITER.
AL3Z3A713F
and the larger hose, the P/S suction line.
Can anyone verify the flow path for the trans and p/s fluid.
