Where did you get the panel that holds the switches?

 

I have 3 of the switches ready to,install. Some wires already run, but I have to tell you, WOW I AM CONFUSED with the wiring diagram!
Jumper to,this terminal, ground this, accessory this, from fused relay here,
Whew I am lost!

 

Right from ottraw on the website. You will need two end and two middle panels to make your own lenght. They lock together like a puzzle. Then since i only have two switches i bought two plugs to fill in the holes, but in the future i can just pop them off and add two more switches!!

 

Its not to tooo difficult. Heres how i did it. ( not my current set up but the same) Black is ground, red is 12v and blue is 12v relay activated. The side with only two terminals is the secondary " night time lights" so you can read the text. I spliced into the dimmer switch wire black/ purple wire for postive and the black wire for ground

 

Wanted to keep mine a little more hidden, and still have room for the rigid rock lights I plan on adding later. I do like the edge dash pod idea though as well.