35's on factory wheels with 2" level?
#1
Member
Thread Starter
35's on factory wheels with 2" level?
I have a 2011 platinum 4x4 and was wondering if I can run some federal 35's with a 2" level? Anyone have pics of 35's on factory wheels? Thanks for any help.
#3
2013 Ruby Red FX4 SCrew
I have 34"s on my factory 20's with a 1.5" level. All is good for me, and I kept the with the same width as the tires I took off (275). But 35's on a 2", I think would be really pushing it. I think you would rub, especially if you go wider, which I assume you would want to.
The following users liked this post:
jbridered (05-30-2014)
The following users liked this post:
jbridered (05-30-2014)
#5
Senior Member
2014 FX4 ... 1.5" AS front level, 2" rear blocks (so basically a 1.5" overall lift) ... 34" tires on stock 20" wheels ...
35's would be just fine on this, so a 2" level/lift would work the same. Your real issue, if any, is avoiding going too wide w/ the tire and having it rub either the front valence under the bumper, or the upper control arm. But in terms of clearance at the wheel well, you're fine w/ 35's.
35's would be just fine on this, so a 2" level/lift would work the same. Your real issue, if any, is avoiding going too wide w/ the tire and having it rub either the front valence under the bumper, or the upper control arm. But in terms of clearance at the wheel well, you're fine w/ 35's.
The following users liked this post:
jbridered (05-30-2014)
The following users liked this post:
jbridered (05-30-2014)