I've seen some people talk about these wheels so I figured I would share mine. They are 20x10 with a -24 offset. I have 295/55/20 nitto trail grapplers on them. Only had to do a 2 inch level.







Only minimal trimming.

 

Very nice!!

 

I want those rims so bad! What did you end up paying for them if you don't mind me asking.

 

those are legit

 

Any rubbing with the -24 offset? I just got a 2014 Fx4 and was looking at a couple different 20x10 wheels with that offset and all the shops and tire companies Ive talked to tell me they wont fit even with a 2.5 level kit... One guy said it would "rip the front fender off" which seems unlikely...

 

THose are sick, love that deep dish look to them!

 

Awesome dude! Love the wheels and that stance!

 

They fit but still rub very very little. I only put a 2 inch level on mine. Here's what they look like at full turn

 

That's a tight fit. I'm thinking I might try the -12 offset with the 295/60R20's and a 2.5 level up front. I ran the 295/70R18s with the original rockstars ina 0 offset on my old Fx4 with a 2.5 level and no trimming at all. But then again the difference between the -12 and -24 offset is only a half inch.... Ahh! What to do! What to do?!

 

So I just got my new wheels and Level kit installed today. Autospring offset 2.5"front spacer/3"rear block kit and Fuel Coupler 20x10 -24 offset with 305/55 Nitto Terra Grapplers. Here are some shots of the stance and the trimming I had to do.