Those are for the Sony Premium Sound System. Did they 2010 have the amp/sub in the back seat and the Sony speakers? My 2010 had that when I was trying to install an aftermarket Nav that didn't have the proper wire harness for those two wires.

 

If this is the case then you can do what I suggested in myprior post. The link I supplied was from my install and what was needed if youare planning on matching up to the dash as I did. As for the connectors, ifyour console had the shifter at one time there would be wires going to theconnectors you showed in the picture that possibly came from the tow haulswitch, the SST rocker and shifter lights for the shifter indicator. Along withthat there is the park lock switch. Since it was a costly option to change outto the floor shifter I just removed it and made a stash pocket in its place. Notsure what you are planning on doing but the thread I supplied will give you acouple of options as others decided to cut the console instead of trying to docomplete dash match as it would have come from the factory as I decided to do. Iwould suggest to probe the wires from the connector to find the positive andnegative wires going to the 12 volt outlets and also the 110v if you want to dothe inverter. Keep in mind that if you want to go the factory route for the110v you will have to buy the wiring harness and the 110 inverter which is over250 bucks. For me the 20 buck one you can get at truck stops works just as goodand I used the savings to do lighting of the storage unit and the ambientlighting throughout!