I recently got my hands on a '13 King Ranch and I decided to level it out. I'm adding a 2" leveling kit but I'm concerned I will be nose high. I measured the distance from ground to the bottom of the fender and the front was 1.5" lower stock. I'd like to get the truck off the ground a little bit so i figured I would do the 2" level and add toyo open country at tires 275/60/r20. Am I going about this the right way or should I go a different route? I definitely do not want to be nose high
It's a super crew with 6.5 bed ( if that info is needed)

 

I did a procomp that said it was 2" max it measured 1.5 inches. When it was installed it leveled perfect.

 

My FX4 is also 1.5" down in the front. Must be a large variation with these trucks because others measure a greater difference. I plan on a front 2" or 2.5" and likely an add a leaf to level it back up.