2013 EB @100k Dreaded P2099/P0016 Code Combo
Thread Starter
Senior Member
Joined: Sep 2020
Posts: 443
Likes: 292
From: Beaver Falls, PA
2013 EB @100k Dreaded P2099/P0016 Code Combo
From what I have read here, I'm in for a new timing chain. Classic symptom of no power when trying to accelerate.
Any suggestions what else I should have looked at when it gets opened up? I had the plugs done very recently, mechanic said everything else looked fine.
Any suggestions what else I should have looked at when it gets opened up? I had the plugs done very recently, mechanic said everything else looked fine.
5 Year Member
Joined: Apr 2017
Posts: 5,053
Likes: 1,631
From: Arizona
Do you have any grinding noise at startup after letting the truck sit for about 8 or more hours, if not, I wouldn't be thinking timing chain stuff.
This sounds like one of your sensors is bad or a wire/plug was broken when the plugs were done. Lots of little connector near the plugs that with just the right pressure can break.
This sounds like one of your sensors is bad or a wire/plug was broken when the plugs were done. Lots of little connector near the plugs that with just the right pressure can break.
Last edited by jdunk54nl; Nov 10, 2020 at 01:17 PM.
Thread Starter
Senior Member
Joined: Sep 2020
Posts: 443
Likes: 292
From: Beaver Falls, PA
Do you have any grinding noise at startup after letting the truck sit for about 8 or more hours, if not, I wouldn't be thinking timing chain stuff.
This sounds like one of your sensors is bad or a wire/plug was broken when the plugs were done. Lots of little connector near the plugs that with just the right pressure can break.
This sounds like one of your sensors is bad or a wire/plug was broken when the plugs were done. Lots of little connector near the plugs that with just the right pressure can break.