I am having trouble troubleshooting my drivers heated seat, I found this post regarding how to determine if its the element or the network and modules https://www.f150forum.com/f38/heated...gnosis-243120/

My problem is that even with the heated seat button off I have 14v at the red wire on the drivers side, the voltage is always there. I tested the passengers side and it has 0v on the red wire but when the seat is turned on it has 14v. I am trying to determine if maybe that write up is for the 2011+ heated seats and maybe controlled differently. Another question is if anyone knows the resistance of a good seat cushion element, I am wondering if i can put a resistor in place of the element and trick the module into thinking the element is there and determine if its the module or element 100%.

Also has anyone found and installed a aftermarket element? I have read alot of people replace the element and it burns out after awhile leaving it be replaced all over again?

Thank you

 

This aftermarket kit is $80 for 2 seats. Which isn't bad.

Comes with:
Top Cushion Seat Heater x2
Bottom Cushion Seat Heater x2
Remote and 12 Volt Power Supply In Car Connector (Cigarette Socket)
Remote includes two switches
Instructions for installation
In stock, ready to ship