2010 dash lights not on during daylight
#1
Junior Member
Thread Starter
Join Date: Jan 2014
Location: Ontario Canada
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
2010 dash lights not on during daylight
the service manual states that the dash lights should be on full during daylight. They are not. The dimmer switch calibration has been done. I took it to the ford dealership and spoke directly to the ford dealer rep. He had no answer but did show me in the service manual they should be on. Using the headlight switch no dash lights at any setting. Any suggestion anyone????
John
John
#2
Senior Member
#3
Junior Member
Thread Starter
Join Date: Jan 2014
Location: Ontario Canada
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
dash lights not coming on during daylight
I took it to the dealer and posted my concern to ford of canada in a letter. They responded back that all 2010's do this and its normal. Has anyone ever had their 2010 f150 lights corrected.
#4
Senior Member
Mine would be off during the day and when it got dark they turned on. I ran it in the auto position. And the sensor is on the dash I did notice once that I covered it up by accident and the lights inside and out stayed on
#7
Junior Member
Thread Starter
Join Date: Jan 2014
Location: Ontario Canada
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for your feedback. The instrument gauges are hard to see under certain daylight conditions. The fact remains is that the service shop manual states the dash lights should be on during daytime running when the sensor is not covered. The ford rep showed me this on his laptop and subsequently I sent of an email to ford of canada. I would like to get a copy of the shop manual if anyone could direct me to a free site.
Trending Topics
#8
2009 and 10 trucks have always done that. There are some inconsistencies in the early manuals as well. Cover up the little square dome in the middle of the dash down by the windshield, and your lights will be on.
#10
2010 F-150 Dash Lights
I'm getting close to 76....eyes not so good under some conditions. Makes it very difficult to see my dash instruments in the daytime without the cluster lights. So I covered the light sensor on the dash with a piece of black duct tape about 2" square, and Voila! the instrument cluster lights come on in the daytime.
The following users liked this post:
CVP33 (12-04-2021)