'09 + Tire and Wheel Fitment CHART
#1
'11 FX4 SCREW 5.ohh!
Thread Starter
'09 + Tire and Wheel Fitment CHART
Ok, so the chart I put together has been in the Tire and Wheel Fitment Guide thread for a few months. But it's getting buried, and not be as useful. There doesn't seem to be a way to edit the Original Post to get it linked into it, so I'm going to create a new thread, that just has the PDF chart. Hopefully this can get sticky'd also. I think any questions should still be asked in the original thread. Found here: https://www.f150forum.com/f38/tire-w...9-newer-68155/
The chart is split by drive train, and whether its stock height, leveled, or lifted. Then the data has been sorted by Tire Diameter in INCHES. I think that way is the most useful. It still isn't complete, but it seems like the majority of tire sizes are included. I've also updated it to include posts up until today (10/23/2012). If I missed yours I'm sorry. I think this just about covers everything, and I don't think I'll be keeping up with it anymore.
Like I said it is a PDF, I would have posted the Excel spreadsheet itself, but these boards don't allow it. It is on Legal sized paper, in a landscape orientation. It has ended up too big to attach (117 Kb limit) in its original form, so I had to scale it some, which made it offset a bit on the page, but all the data is still there.
Tire size converter: http://www.dakota-truck.net/tirecalc/tirecalc.html
Wheel Offset Calculator: http://www.mrw-wheels.com/wheel%20te...t%20chart.html
Here is a quick reference chart for Backspace/Offset, that I thought might be useful.
Click below for the new Chart.
The chart is split by drive train, and whether its stock height, leveled, or lifted. Then the data has been sorted by Tire Diameter in INCHES. I think that way is the most useful. It still isn't complete, but it seems like the majority of tire sizes are included. I've also updated it to include posts up until today (10/23/2012). If I missed yours I'm sorry. I think this just about covers everything, and I don't think I'll be keeping up with it anymore.
Like I said it is a PDF, I would have posted the Excel spreadsheet itself, but these boards don't allow it. It is on Legal sized paper, in a landscape orientation. It has ended up too big to attach (117 Kb limit) in its original form, so I had to scale it some, which made it offset a bit on the page, but all the data is still there.
Tire size converter: http://www.dakota-truck.net/tirecalc/tirecalc.html
Wheel Offset Calculator: http://www.mrw-wheels.com/wheel%20te...t%20chart.html
Here is a quick reference chart for Backspace/Offset, that I thought might be useful.
Click below for the new Chart.
#3
'11 FX4 SCREW 5.ohh!
Thread Starter
That was mentioned in the original thread, but nothing came of it??
I thought Paxford asked? But I'm not sure. He was the OP of that thread.
I thought Paxford asked? But I'm not sure. He was the OP of that thread.