Does an 06 bed extender fit in a 2013 truck? I know I'd likely have to buy the bolts and bushings to go in the holes, but are they there and does everything line up?

 

Nope.

 

I put the liner from my 05 fx4 into my 10 when i got it but the holes for the hook loops don't line up without enlarging the holes in the liner and the tail gate piece wont work at all.

 

I just moved my bed extender from a 2005 Lariat to a 2010 XLT last weekend. I needed to tap the bushing in the center hole to install the threaded pivot points and then just snapped the plastic pieces from the old truck into the top and bottom holes of the new truck. I believe the tap was a metric 1.5. The alignment for my switch was spot on. I don't know if the 2013 bed is different from 2010 but for mine, no problem.

Todd

 

I saw people talk about doing it in 2010's, but thats what I wasnt sure of (Is the 2013 bed different from 2010)

 

Just a note to say thanks for confirming that my old extender could be used in my 2013. I tapped the bushings in my 2013 XLT with 3/8-16 threads and it fits just fine. I am going to get the plastic bushings tomorrow.

 

I have an extender and pivot points I removed from my '05 Lariat SCrew. I bought a 2013 FX4 and was wondering if I could do just that. Thanks for the info!