Topic Sponsor
Off-Road Section All discussion and questions about off-road in this Section
Sponsored by:
Sponsored by:

superchips cortex programmer

Old Jul 14, 2010 | 07:45 AM
  #1  
joliver2009's Avatar
Thread Starter
Josh Oliver
 
Joined: May 2010
Posts: 7
Likes: 3
From: anniston,alabama
Default superchips cortex programmer

i have a superchip cortex programmer on the way for my 2010 5.4l f 150. im just wondering about anybodys experience with them and what settings they get the best mileage and performance gains in. if you know of any pros or cons of this programmer id love to hear it thanks
Reply
Old Jul 17, 2010 | 01:36 AM
  #2  
Juelz8302's Avatar
Junior Member
 
Joined: Jul 2010
Posts: 4
Likes: 0
From: Camp Pendleton, San Diego CA
Default

Yeah I just bought it along with the BBK 80mm Throttle Body. I love it and it works great.... Improved throttle and smoothed it out a lot... The gains are very noticeable.... Don't know yet on fuel economy yet, only had it for two days.
Reply
Old Jul 17, 2010 | 01:38 AM
  #3  
km57diver's Avatar
Junior Member
 
Joined: Jul 2010
Posts: 20
Likes: 0
Default

you have a link for the programmer and chip?
Reply
Old Jul 17, 2010 | 01:50 PM
  #4  
Juelz8302's Avatar
Junior Member
 
Joined: Jul 2010
Posts: 4
Likes: 0
From: Camp Pendleton, San Diego CA
Default Superchip

Superchips.com - Click Me
Reply
Old Jul 17, 2010 | 01:52 PM
  #5  
km57diver's Avatar
Junior Member
 
Joined: Jul 2010
Posts: 20
Likes: 0
Default

thanks...
Reply
Old Jul 20, 2010 | 05:49 PM
  #6  
2010_FX4's Avatar
Elite Member
 
Joined: Apr 2010
Posts: 403
Likes: 2
From: RGV, Texas
Default

Joliver, I have a similar set up on my FX4 I noticed after I set the tire diameter in the programmer my speedo was still off. I used a garmin gps to measure my speed and it still showed around five mph off (not a huge margin but can add up over time). Anyhow I had to tell the programmer I was using a 33.75" tire to get the speedo almost dead on even though the tire measures 35". Hope this helps.
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 12:01 PM.