"how to" smoked headlights
#3
how did you do it for cheap? and why would you want to tint a headlight, by the way that is a pic of a taillight, and you posted in off-road section bro. You should of put it in a diff section. on the other hand you did a very good job on doing yours.
#4
WIK3D
Thread Starter
Join Date: Apr 2010
Location: Buffalo NY
Posts: 157
Likes: 0
Received 0 Likes
on
0 Posts
o just realized that i said headlight sorry everyone but reason being my phone only allows me to post in off road cause its the section i started it in and cant change it
#5
WIK3D
Thread Starter
Join Date: Apr 2010
Location: Buffalo NY
Posts: 157
Likes: 0
Received 0 Likes
on
0 Posts
way to do it best and right so it looks good is to sand the whole tail light down with 1000 grit wet or dry sand paper $2.50 wipe it down with some mineral spirts or any rubbing alcohol if u have access to a vinyl cutter the ideas are unlimtited to the design u can put on or buy them from decal shop take the vinyl cut out and place it where you would like it to be (the stars) two light coats of krylon black bond to plastic paint wet sand it down and hit it with about 5-8 light coats of krylon clear bond to plastic clear coat all together should spend around 18 bucks
#7
way to do it best and right so it looks good is to sand the whole tail light down with 1000 grit wet or dry sand paper $2.50 wipe it down with some mineral spirts or any rubbing alcohol if u have access to a vinyl cutter the ideas are unlimtited to the design u can put on or buy them from decal shop take the vinyl cut out and place it where you would like it to be (the stars) two light coats of krylon black bond to plastic paint wet sand it down and hit it with about 5-8 light coats of krylon clear bond to plastic clear coat all together should spend around 18 bucks
My dad did a set for my old suv and it turned out great when i had her, and it was free lol.<~~Dad is a painter) lol. I just wanted to know your method.