Topic Sponsor
Off-Road Section All discussion and questions about off-road in this Section
Sponsored by:
Sponsored by: Halo Lifts

Gen 2 raptor rear shocks on 2010 f150?

Thread Tools
 
Search this Thread
 
Old 04-22-2019, 02:37 PM
  #1  
Junior Member
Thread Starter
 
LittleRedWagon's Avatar
 
Join Date: Apr 2019
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Default Gen 2 raptor rear shocks on 2010 f150?

Hi, I have a 2010 f150 fx4. I would like to run the gen 2 3.0 rear raptor shocks on my stock blocks, anyone have any insight on that being possible? My shocks ride at 23.5 inches right now, and I’m reading the raptors should ride at 25 inches. The overall shock is 31 for the gen 2s, and the other option I’m looking at is the fox 2.0s and they are 28.5 inches long, does anyone know if the extra 2.5 inches of shock length will leave me bottoming out? Or will the gen 2 shocks having the 13 inches of travel give me enough room? Thanks
Old 04-23-2019, 02:50 PM
  #2  
Senior Member
 
98Rangerdave's Avatar
 
Join Date: Apr 2018
Location: Apple valley, CA
Posts: 113
Received 46 Likes on 29 Posts
Default 2012 xlt 2wd

Originally Posted by LittleRedWagon
Hi, I have a 2010 f150 fx4. I would like to run the gen 2 3.0 rear raptor shocks on my stock blocks, anyone have any insight on that being possible? My shocks ride at 23.5 inches right now, and I’m reading the raptors should ride at 25 inches. The overall shock is 31 for the gen 2s, and the other option I’m looking at is the fox 2.0s and they are 28.5 inches long, does anyone know if the extra 2.5 inches of shock length will leave me bottoming out? Or will the gen 2 shocks having the 13 inches of travel give me enough room? Thanks
I am running a set of 2017 raptor take offs on my 2012 xlt 2wd. Stock leafs, only thing I added was a 1 1/2” lift block. No problems so far, I did take off the plastic rock guards though in order to fit them. Photos below:








Quick Reply: Gen 2 raptor rear shocks on 2010 f150?



All times are GMT -4. The time now is 09:29 PM.