I'm wanting to put the following wheel/tire combo on my 2010 FX4 SCrew w/2" Hell Bent Level:

Toyo Open Country AT tires
305/55/20 (33.3x12.4) or 305/60/20 (34.3x12.6)

RBP 93-R wheels

Spec choices on wheels are:

0 offset/5.5 back space
-12 offset/5.0 backspace
-25 offset/4.5 back space

Which will stick out the fender wells the least? How much should each of the choices stick out? What about rubbing?

Thanks!!!

 

The 0 offset
I think mine is either a + 12 or a 0 offset with 305/55/20 on 20x9 badlands and a 2" level kit

 

Thanks!!!

About how much do they stick out? That first pic looks like a lot?

Which offset pulls everything in the most, more negative or positive (sorry, didn't read your first sentence)? Same question on backspacing, more or less?

teamroper

 

The higher the positive offset the more they tuck under, the lower the offset the further they stick out.

 

5.5in. backspacing is stock so they would stick out about an 1 1/2- 2in.s farther than stock because of the wider wheel and wider tire.

 

Thanks Guys!!!

What's the factory offset on the 20" FX4 wheels?

The other two wheels I'm looking at:

Ballistic Off-Road Wizard 810
Moto Metal 951

Both are 20x9 +30 offset 6.18" backspace

How would they be with the above mentioned tires & level kit? Would they stick out very far or stick in too far?

I think I've seen the Ballistic, only in 18x9 w/33x12.5x18 Toyo MT's and the HB level kit on here somewhere?

 

a 9 inch wide rim with 6.18 backspacing will sit just about stock. Stock is about 5.5 backspacing, that wont stick out much at all.