tpms sensors
Thread Starter
2014 STX SCREW
iTrader: (1)
Joined: Mar 2014
Posts: 715
Likes: 111
From: Barboursville, WV
can I pull the sensors from the stock wheels and reuse in new wheels?
If not, where can i buy them for a 2014 stx?
Thanks.
If not, where can i buy them for a 2014 stx?
Thanks.
Last edited by brianw0048; Jun 25, 2014 at 10:31 AM.
Yes, you can transfer your existing tpms sensors into your new aftermarket wheels, it's what most people do. You can also purchase new aftermarket tpms sensors from Discount Tire if you want to keep both sets.
At Discount Tire we sell what are called TPMS Rebuild Kits. It replaces all the ruber and screw on components of the sensor. So if you have the snap in sensor you get a whole new rubber valve, if you have clamp in you get a new rubber O-Ring and Nut.
These are used everytime the tire comes off the wheel. They are kinda expensive but it's a one time charge from us. You but it once and we never charge you again if the tire has to come off the wheel. When putting new wheels on we would use these to put your old sensors in your new wheels. I don't reccomend buying new sensors unless you planned on having a summer/winter set of assemblies that you didn't want to constantly swap sensors out on.
These are used everytime the tire comes off the wheel. They are kinda expensive but it's a one time charge from us. You but it once and we never charge you again if the tire has to come off the wheel. When putting new wheels on we would use these to put your old sensors in your new wheels. I don't reccomend buying new sensors unless you planned on having a summer/winter set of assemblies that you didn't want to constantly swap sensors out on.





