Hey guys I have a 2013 f150 that I want to put 20x12 -43 offset fuel tritons with 33x12.50s. It is leveled 2.25 and I want to know what all I would have to trim for that to fit. If it's major metal I'll pick a smaller size. Just really like the stanced look. Thanks for the help!

 

You should be fine with the leveling kit....I don't believe you'll have any rubbing issues. Is it 4X4?

 

With such huge negative offset, you will most definitely be trimming. I'm running a -13 offset with 4" lift and trimming was necessary and still get a slight rub at full turn over bumps with some speed.

 

Look on Custom Offsets. https://www.customwheeloffset.com/wh...t_to=33&page=1

 

Just for reference, I've got approximately 34x12, 0 offset, and had to trim the corners of the valance as well as a little in the back of the wheel well.

Still rub on the bulge in the liner at 3/4 turn and a bump. I think my issue is more width, and if so, the 33x12.5 being wider, plus less offset, I'd guess similar trimming further out. Hopefully it gives you at least some idea of what you may need to do